how one can decide number of element or element size?
while finding the resultant of the following component i came across some issues..that case 1) the component with 20 elements and 50 as element size gives 72.5N/mm2 as stress..and case 2) the component...
View ArticleRe: edge editing (fillets)
hi Syed, can't be sure. If you get any extra surface, you may have to edit the surface using different options available in HyperMesh (like quick edit, surface edit, etc..) Some times it doesn't matter...
View ArticleRe: how one can decide number of element or element size?
Syed, Please read section 9.5 How To Decide Element Length - in the HyperWorks Student guide.
View ArticleRe: option to quickly see my post
Syed, You can search with your name in the search forums field above in order to see all your posts, You can click on subscribe in your posts so that you get an email to all the replies to your post.
View ArticleRe: How to upload *.hm files to the Support Forum
Syed, Please use the reply option in the top right hand corner instead of quick reply option when you need to upload images.
View ArticleClik here to view.
Re: Visualization - transparency of solid elements
adwaitmane, To see the fe style icon (the meshed cube described above) for each component, you need to right click on the model browser and go to configure browser, once here, check the fe style and if...
View ArticleRe: Segmentation error with OSSmooth
Linus, This is perhaps due to the parameters chosen (click on parameters button after setting autobead to none in the ossmooth panel) of the non design element processing section. Can you upload the...
View Articlehow to export to .IGES or .STL my topology optimization
Hello, My name is Samuel Monge, and I'm using HyperWorks to optimization of FSAE chassis car, and I don't know how to export to .IGES or .STL my topology optimization. If you could help I thank you soo...
View ArticleClik here to view.
Re: how to use Radioss Block Format?
Dear PrakashPagadala Thank you so much for your always help. I am also using the Radioss V12.0 Block Format. When I go to analysis page--> Control Cards. I still can not get the buttons. Maybe I am...
View ArticleRe: how to export to .IGES or .STL my topology optimization
Hi Samuel, You can use OSSmooth to output the optimized model to IGES or STL or other CAD formats. Please refer to the tip and trick from the link below for more information on OSSmooth option in...
View ArticleClik here to view.
Re: how to use Radioss Block Format?
Dear PrakashPagadala When I go to analysis page and press the Control Cards I can only get the things as shown in the pictures below. Could you tell me what is the mistake? Thank you so much.
View ArticleRe: how to export to .IGES or .STL my topology optimization
Hi Samuel, Once the topology optimization is completed, you can then go to post > ossmooth (set autobead to none) and then open the .fem file here (the ,sh file will be automatically loaded) make...
View ArticleClik here to view.
AcuSolve: Default pressure setting
Hi! Who know what is default pressure in AcuSolve? If I want to do a simulation at atmospheric pressure 1 atm (101325 Pa), do I need to enter the value in any section? such as at absolute pressure...
View ArticleRe: how to use Radioss Block Format?
Hi Sun, Please update the Application to latest patch. You can download the update from http://www.altairhyperworks.com/ClientCenterHWUpdateDownload.aspx?pro_cat=HyperWorks you should register before...
View ArticleRe: AcuSolve: Default pressure setting
If you are doing incompressible both these settings are not required. Absolute pressure offset would be necessary for compressible cases likes workshop5 compressible nozzle. Nodal Initial conditions...
View ArticleRe: AcuSolve: Default pressure setting
In addition to that, most CFD cases are velocity/mass flux at inlet and pressure =0 (relative to atmosphere) at outlet. Most not all...
View ArticleClik here to view.
Re: how one can decide number of element or element size?
4.5 How to Decide Element Length (IT IS THE EXTRACT FROM HYPERMESH DTUDENT GUIDE.) 1) Based on previous experience with a similar type of problem (successful correlation with experimental results). 2)...
View ArticleRe: Query on Harmonic analysis using Optistruct
Sreejesh, what are you refering to TB in RLOAD2? is it blank?
View ArticleRe: Topology Optimization with Level Set Method
Hi Hawk, To use the LEVEL SET method, you will need to mention this option in the DTPL card, When you are pre processing for a topology optimization, you will be creating a DTPL card (the options...
View ArticleClik here to view.